(615)-255-4810  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Water Heaters Residential Residential Electric Tank Water Heaters 2.5 ELEC W/H POU 120V 1440W H=12.9 D=10

2.5 ELEC W/H POU 120V 1440W H=12.9 D=10

PART ASW CE-2.5-AS
SUPPLIER American Standard®
SUPPLIER PART # 50315040660
Calculating price...
QUANTITY

About this item

American Standard® Electric Water Heater, Point-of-Use, Series: CE Series, 2.5 gal Tank, 120 VAC, 12 A, 1440 W, 1 ph, 3/4 in Water Connection, Immersion Heating Element, 6.7 gph at 90 deg F Rise Recovery, 150 psi, ASME Yes/No: No, Glass Lined Steel, 10 in Dia x 13-5/8 in H

American Standard® Point-Of-Use Electric Models - are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under counters, mop sinks, cabinets or in other confined areas.

Meet or Exceed ASHRAE 90.1B - 2001 Standard and are Listed with The California Energy Commission|UL Listed
Amperage Rating 12 A
ASME Yes/No No
Dimensions 10 in Dia x 13-5/8 in H
Heating Element Immersion
Material Glass Lined Steel
Phase 1
Power Rating 1440 W
Pressure Rating 150 psi
Recovery Rate 6.7 gph at 90 deg F Rise
Series CE Series
Tank Capacity 2.5 gal
Type Point-of-Use
Voltage Rating 120 VAC
Water Connection 3/4 in
Brand American Standard®
Warranty 6 Years Limited on Tank and Parts
  • Heavy gauge steel tank
  • Inner tank glass-lined with Dura-Glas™ and fired at 1600 deg F for optimum protection from the effects of corrosion
  • non-cfc energy saving foam insulation - reduces energy cost by maximizing heat retention
  • Anode rod - to ensure longer tank life
  • Immersion heating element - applies heat directly to water
  • Fully adjustable thermostat control - for variable temperature control to 160 deg F
  • Factory installed energy cut-off system
  • Top and side water connections - on 6 to 20 Gallon Models affording choice of cold-in and hot-out connections
  • Factory installed temperature/pressure relief valve
  • Brass drain valve (full port ball) - designed to allow easy draining and avoid clogging
  • American Standard® point-of-use electric water heraters - are certified at 300 psi test pressure and 150 psi working pressure and all tanks are 100% hydrostatically tested at the factory